Induction power supply
ABE-40AB
40kW
High frequency hardening and brazing; the smallest scanner power supply.
ABE-40AB covers brazing, end heating, annealing, hardening, tempering and soldering for hand tools and auto components. We configure it as a high frequency machine for hardening and brazing applications.
We pair our PLC controlled vertical scanner with ABE-40 kW through ABE-120 kW power supplies. We select the power class, coil and traverse cycle together to suit the component.
A dedicated ABE-40AB CI ring heating machine is built on the same power class for the alloy wheel industry, using medium frequency to pre-heat cast iron rings under closed-loop temperature control.
Technical specifications
| Parameter | Specification |
|---|---|
| Output power | 40 kW. We confirm the duty cycle for your application. |
| Oscillation frequency | We select the frequency for your material, heating zone and required case depth. |
| Input power supply | We confirm the voltage, phase, frequency and connected load in your quotation. |
| Cooling water requirement | We specify the water flow, pressure, quality and cooling circuit for your machine configuration. |
| PLC / automation interface | Manual, PLC or CNC control options. We confirm communications and I/O with your automation requirements. |
| Compatible steels and alloys | We assess your material grade and heat treatment requirements before confirming suitability. |
| Switching technology | Solid-state IGBT |
Calculating required power? Run your cycle time on the Induction Power Estimator.
We select the frequency, dimensions, cooling and handling for your application. Send us your component drawing and required cycle time so we can confirm the complete machine specification.
Related processes
- Induction hardeningA hard, wear-resistant case on a tough core, in seconds, with the heat placed exactly where you want it.
- Induction brazingJoints that come out the same every time, because the heat is placed by a coil and timed by a machine.
- Induction annealingSoftening metal, relieving stress and restoring formability, on the section that needs it.
- Induction shrink fittingAssembling interference fits by expanding the outer part instead of forcing it on.
- Induction pre-heatingBringing a component to a controlled temperature before the operation that follows.
- Induction bondingActivating an adhesive or bonding layer by heating the metal it is bonded to.
Related products
- Induction heating machinesIGBT power supplies from 5 kW to 500 kW, supplied standalone or built into a PLC or CNC controlled machine.
- Induction hardening machinesVertical and horizontal hardening machines for shafts, gears, bushes, axle shafts and flywheel rings.
- PLC controlled vertical hardening scannersA scanning hardening machine: the part traverses through the coil while quench follows behind it.
- Induction brazing machinesRepeatable brazed joints with heat placed only where the filler must flow. Single and double station.
- Induction bonding machinesPLC controlled rotary machines for heat-activated bonding under controlled temperature and time.
- CI ring and bush heating machinesFully automatic PLC machines that pre-heat cast iron rings and bushes under closed-loop temperature control.
Tell us about the part.
Send a drawing, the material, the case depth or temperature you need, and your production rate. Our engineers will help define the right machine for your process.