Manufacturing in Faridabad since 2001
Induction machines
built around
your component.
We build IGBT heating, hardening and brazing systems from 5 to 500 kW, PLC and CNC automation, and air cooled plating rectifiers to 10,000 A.
- 5to500kWInduction power
- 20to120mmShaft diameter
- 0.8to5mmCase depth
- 300to10,000APlating rectifier at 12 V
Machine configuration depends on component geometry, material and production requirements.
A closer look
Every angle. In your hands.
Explore two of our machine designs in 3D.
Turn the machine, inspect the layout, find your perspective.
3D design visualisations. Final configuration is tailored to your component.
What we build
Two business lines: induction heating and hardening machinery, and IGBT power electronics for electroplating. Both designed and manufactured at the Faridabad works.
- Air cooled IGBT10,000 AAt 12 V. Configured for your bath.Electroplating rectifiersAir cooled IGBT rectifiers from 12 V 300 A to 12 V 10,000 A, with 18 V and 24 V ranges.
Induction heat treatment processes
Hardening, heating, brazing and more. Explore the process, then find the machine for your component.
- Induction hardeningA hard, wear-resistant case on a tough core, in seconds, with the heat placed exactly where you want it.
- Induction brazingJoints that come out the same every time, because the heat is placed by a coil and timed by a machine.
- Induction annealingSoftening metal, relieving stress and restoring formability, on the section that needs it.
- Induction temperingTrading a little hardness for a lot of toughness, in line with the hardening machine.
- Induction shrink fittingAssembling interference fits by expanding the outer part instead of forcing it on.
- Induction billet heatingSteel at forging temperature in seconds, paced to the press, with far less scale.
- Bar and end heatingHeating only the end of the bar that is about to be formed, and nothing else.
- Induction pre-heatingBringing a component to a controlled temperature before the operation that follows.
- Induction bondingActivating an adhesive or bonding layer by heating the metal it is bonded to.
The ABE range
Compare our ABE power supplies and shaft-hardening configurations. We will confirm the right machine for your component and cycle time.
| Model | Power | Max shaft diameter | Principal processes |
|---|---|---|---|
| ABE-15AB | 15 kW | Ask us | Brazing, End heating, Annealing, Hardening, Tempering, Soldering |
| ABE-25AB | 25 kW | 30 mm | Brazing, End heating, Annealing, Hardening, Tempering, Soldering |
| ABE-40AB | 40 kW | Ask us | Brazing, End heating, Annealing, Hardening, Tempering, Soldering |
| ABE-50AB | 50 kW | 60 mm | Brazing, End heating, Annealing, Hardening, Tempering, Soldering |
| ABE-60AB | 60 kW | 80 mm | End heating, Hardening, Tempering, Billet heating, Brazing |
| ABE-70AB | 70 kW | Ask us | Hardening |
| ABE-100AB | 100 kW | Ask us | End heating, Hardening, Tempering, Billet heating |
| ABE-120AB | 120 kW | 120 mm | End heating, Hardening, Tempering, Billet heating |
The coil is the tooling
An induction machine without the right inductor is a power supply and nothing else. The coil decides where the field goes, how tightly it couples to the part, and therefore whether the case is uniform. It is wound to the component, not bought from a catalogue.
We design and build our inductors for auto components, tractor parts, JCB parts and hand tools. We have built induction systems in Faridabad since 2001.
How inductors are designedWhere the machines work
Built for components across automotive, agriculture, tooling and metal finishing.
- Automotive componentsShafts and axle shafts, Gears and sprockets, Bushes and bearing seats
- Tractor and agricultural equipmentTractor shafts and axle shafts, Gears and splines, Bushes and pins
- Hand toolsSledge hammer heads, Claw hammer heads, Chisels
- ForgingForging billets, Bar stock for hot and warm forging, Fastener blanks
- Construction and earthmoving equipmentLinkage pins, Bushes and bearing seats, Shafts
- Motors and electrical manufacturingMotor housings, Stators, Bearings
- Alloy wheels and castingsCI rings, Drums, Bushes
- Electroplating and metal finishingGold, silver, nickel, chrome and zinc plating baths, PCB and electronics plating, Automotive and heavy industrial component plating
Tell us about the part.
Send a drawing, the material, the case depth or temperature you need, and your production rate. Our engineers will help define the right machine for your process.